Make room for data
Yield monitors are standard options on many combines today, and yield-mapping data is important information for MFA’s precision agriculture services. With harvest season near, University of Missouri Extension offers these tips for collecting yield data before combines hit the field.
- Back up last year’s yield data.
- Copy each season’s data to a unique folder.
- Maintain several backup copies of the display/raw data in different locations to prevent losses from theft, damage or modification.
- Delete old files from the memory card or USB drive. Clear display memory if storage capacity is low.
- Check data cards or USB drives to make sure they work properly.
- Contact your local dealer or manufacturer for the most recent software and firmware upgrades for your yield monitoring and mapping system, the display, GPS receiver and other components.
- Check all cables, connections and sensors for wear or damage. Ensure that wiring and harness connections are tight.
- Make sure moisture sensor units are clean and undamaged.
- For combines with a mass flow sensor (usually at the top of the clean grain elevator), look for wear on the flow sensor’s impact or deflector plate. Replace the plate if worn or damaged.
- Look for excessive wear on the grain elevator and missing or worn paddles.
- Make sure the clean grain elevator chain is tightened to manufacturer specifications.
- For combines with an optical sensor, ensure the clean grain elevator paddles are not rubbing against sensors.
- If purchasing a new or used combine with an existing yield monitoring system, check for proper installation.
- If using a grain cart with scales or a weigh wagon for yield monitor calibration loads, check that they give accurate data. Check weights against certified scales to ensure load estimates are within a few percentage points. Use the same scales throughout calibration.
- To ensure your grain moisture meter’s accuracy, take it to a local grain elevator with a federally approved moisture meter. Compare estimates on grain samples with a wide range of moistures.
- Hits: 2201